Paso el RivaTuner y al loro a lo q pongo en mayusculas
$ffffffffff Northbridge information
$ffffffffff ---------------------------------------------------
Description : VIA KT266/333 series
Vendor ID : 1106 (VIA)
Device ID : 3099
AGP bus : revision 2.0
AGP status : enabled
AGP rate : 1x 2x 4x supported, 2x selected <--- EN LA BIOS ESTA A 4x!! lo mas gracioso esta mas abajo
AGP SBA : supported, enabled
AGP FW : not supported
$ffffffffff ---------------------------------------------------
$ffffffffff Display adapter information
$ffffffffff ---------------------------------------------------
Description : NVIDIA GeForce4 Ti 4200 with AG...
Vendor ID : 10de (NVIDIA)
Device ID : 0281
Location : bus 1, device 0, function 0
Bus type : AGP revision 3.0 (AGP 2.0 mode)
AGP status : enabled
AGP rate : 1x 2x supported, 2x selected <---- ???? SOLO 2x?? SI SE SUPONE QUE ES HASTA 8x!! alguien me explica que ocurre?
AGP SBA : supported, enabled
AGP FW : supported, disabled
Base address 0 : de000000 (memory range)
Base address 1 : d0000000 (memory range)
Base address 2 : none
Base address 3 : none
Base address 4 : none
Base address 5 : none
$ffffffffff ---------------------------------------------------
$ffffffffff NVIDIA specific display adapter information
$ffffffffff ---------------------------------------------------
Graphics core : NV28 revision A2
Hardwired ID : 0281
Memory bus : 128-bit
Memory type : DDR (RAM configuration 03)
Memory amount : 131072KB
Core clock : 249.750MHz
Memory clock : 256.500MHz (513.000MHz effective)
Reference clock : 27.000MHz
Maximum Fvco : 900.000MHz
Core PLL Fvco : 499.500MHz
Memory PLL Fvco : 513.000MHz
Segun el RivaTuner la targeta aunq sea 3.0... solo acepta 1x y 2x!!!